Painting your kitchen cabinets can make a huge difference to the look of a room. However, if not done properly, the results can be disastrous. When armed with the right knowledge, you can paint your cabinets and know the end results will be beautiful And the solid.
Let’s talk about Different Types of paints in addition to the classic and popular colors of this year. Here’s everything you need to know to choose the best Paint for kitchen cabinets.
types of paint:
There are many different types of paint, but the main thing we recommend is high quality and difficult drying.
As you will see below, the steps for painting kitchen cabinets require a lot of prep work and labor. So, do not use cheap and low-quality paint, because after all that hard work, it will fade over time and use.
You also want to use very dry paint because kitchen cabinets are different from interior walls because they get a lot of wear and tear. Think about how often you touch your cabinets (to take things out of drawers or put things away in cabinets) when you probably won’t touch your walls much at all.
The best paints for kitchen cabinets:
Can I use chalk paint?
Yes, you can use chalk paint on kitchen cabinets, but we recommend reading Paint Cabinets with Chalk Paint (Pros and Cons) first.
Favorite Paint Colors for Kitchen Cabinet in 2022:
How to paint kitchen cabinets correctly:
Step 1. Remove doors and drawers from cabinet boxes. Remove any hinges, knobs, or other hardware that might be in the way of the paint.
advice: Number the doors with a small piece below where the hinges go and cover them with a small piece painters tape. This will make it easier when re-changing the doors.
Step 2. Clean your closets. One of the most important steps in the process is making sure that all grease, dirt, and dirt are removed from all of your tanks. In the case of especially greasy tanks, we recommend spraying the surface with it Crowd Cotter Degreaser.
After removing excess grease, dampen a clean cloth Liquid sandpaper / sandpaper remover And wipe well. (We recommend wearing rubber gloves when using liquid sandpaper.)
Step 3. sand. All surfaces must be thoroughly sanded with fine sandpaper (180 or 220 grit). If you have one, you can also use a file electric sander To help speed up the process. There’s no need to sand the surfaces down to the bare wood – just make sure the surfaces are completely wet.
Step 4. Remove dust from all cabinet surfaces. To remove the bulk of the dust, you can dust it with an old paintbrush. If you have an air compressor, you can blow the dust out with the blowing nozzle.
Then, while wearing rubber gloves, get a clean piece of cloth and apply some denatured alcohol to her. Wipe remaining dust off surfaces with a rag.
Step 6. Prepare the lockers. Now that the cabinets are primed, it’s time for a coat of primer. If you have paint sprayer It is convenient to use, the most durable primer shellac. The downside to this primer is that it needs to be sprayed with a respirator, as it smells very bad.
The product can be cleaned with either denatured alcohol or a mixture of ammonia and water. For all those DIYers who use a brush instead of a sprayer, the second best product to use in your cabinets is high quality Water-based bonding primer.
Do your research on this and be sure to buy a primer that sticks well to high traffic surfaces.
Paint spray gives the smoothest finish, but you can also use a brush or roll on the paint. The rolled and polished finish can turn out very nicely. There is no difference in durability between spraying or painting by hand.
Step 7. light sand. After the primer has dried completely, gently sand the surfaces 220 or 320 grit sandpaper. Remove any extra dust, and then you’re ready to paint.
Step 8. fee. Once you are done priming and prepping, the cabinets are ready for the first and second coats of paint. Don’t reduce costs on painting your cabinet. It is very important that you buy High quality, hard-to-dry paint (Alkyd Urethane Enamel) that withstands daily use.
Recommended drying time:
Be sure to leave plenty of dry time between coats of paint. Most paints recommend 2-4 hours of drying time between coats. Drying time can be speeded up by using fans and being in a low humidity environment.
Step 9. Remove all mask and tape.
Step 10. Reinstall the doors and drawers. most recent hinges They can be adjusted if necessary to ensure that the doors are hung properly.
What you should not do:
There are several things that can cause the paint to not work:
- Not cleaning and sanding your tanks properly or completely. We cannot stress this move enough. Preparation is key to long-term durability.
- Do not use a bonding primer before painting.
- Use latex paint instead of reinforced urethane enamel. Conventional latex/water-based paint will never dry hard enough to withstand constant touch, will become sticky and will eventually begin to flake off.
Don’t let this confuse you! The project will be very rewarding in the end! Follow the steps above and you can be sure that your freshly painted cabinets will look great and will last for years.
You can use the same steps to paint furniture – such as wooden dining chairs.
Is it better to spray or roll up kitchen cabinets?
Spraying is a better coating method for kitchen cabinets than rolling because it won’t leave texture (while rolling). Spraying is also faster, but requires a significant amount of prep work and equipment. Keep in mind that you can rent a paint sprayer if you don’t want to buy one.
Once your kitchen cabinets are painted, you may look around and want to update your kitchen backsplash or worktops. Here are some related posts:
Let us know if you have any questions, or if you used this tutorial! xo.